Я не могу подключиться к Интернету через Reliance Netconnect+ на моем Fedora 14? Он работает правильно на Windows.
Всякий раз, когда я запускаю команду wvdial, я вижу ошибку ниже:
--> WvDial: Internet dialer version 1.61
--> Cannot open /dev/ttyUSB0: No such file or directory
--> Cannot open /dev/ttyUSB0: No such file or directory
--> Cannot open /dev/ttyUSB0: No such file or directory
Я вижу ниже журналы при подключении к устройству:
Jun 12 09:53:35 localhost kernel: [ 2180.144145] usb 4-2: new full speed USB device using uhci_hcd and address 2
Jun 12 09:53:35 localhost kernel: [ 2180.294153] usb 4-2: New USB device found, idVendor=12d1, idProduct=1505
Jun 12 09:53:35 localhost kernel: [ 2180.294163] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=4
Jun 12 09:53:35 localhost kernel: [ 2180.294171] usb 4-2: Product: HUAWEI Mobile
Jun 12 09:53:35 localhost kernel: [ 2180.294176] usb 4-2: Manufacturer: HUAÿWEI TECHNOLOGIES
Jun 12 09:53:35 localhost kernel: [ 2180.294182] usb 4-2: SerialNumber: ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ
Jun 12 09:53:35 localhost mtp-probe: checking bus 4, device 2: "/sys/devices/pci0000:00/0000:00:1d.0/usb4/4-2"
Jun 12 09:53:35 localhost mtp-probe: bus: 4, device: 2 was not an MTP device
Jun 12 09:53:35 localhost kernel: [ 2180.670958] Initializing USB Mass Storage driver...
Jun 12 09:53:35 localhost kernel: [ 2180.671294] scsi5 : usb-storage 4-2:1.0
Jun 12 09:53:35 localhost kernel: [ 2180.671415] usbcore: registered new interface driver usb-storage
Jun 12 09:53:35 localhost kernel: [ 2180.671417] USB Mass Storage support registered.
Jun 12 09:53:36 localhost kernel: [ 2181.677229] scsi 5:0:0:0: CD-ROM HUAWEI Mass Storage 2.31 PQ: 0 ANSI: 0
Jun 12 09:53:37 localhost kernel: [ 2181.707188] sr1: scsi-1 drive
Jun 12 09:53:37 localhost kernel: [ 2181.709536] sr 5:0:0:0: Attached scsi generic sg2 type 5
На работающей команде
usb_modeswitch -H -v 0x12d1 -p 0x1505
Looking for default devices ...
Found devices in default mode or class (1)
Accessing device 002 on bus 004 ...
Using endpoints 0x08 (out) and 0x87 (in)
Using endpoints 0x08 (out) and 0x87 (in)
Inquiring device details; driver will be detached ...
Looking for active driver ...
OK, driver found ("usb-storage")
OK, driver "usb-storage" detached
SCSI inquiry data (for identification)
-------------------------
Vendor String: HUAWEI
Model String: Mass Storage
Revision String: 2.31
-------------------------
USB description data (for identification)
-------------------------
Manufacturer: HUA�WEI TECHNOLOGIES
Product: HUAWEI Mobile
Serial No.: �������������������
-------------------------
Sending Huawei control message ...
OK, Huawei control message sent
-> Run lsusb to note any changes. Bye.
Я бежал ниже команды также, но не повезло.
modprobe usbserial vendor=0x12d1 product=0x1505
Запустил wvdial после вышеуказанной команды:
--> WvDial: Internet dialer version 1.61
--> Cannot get information for serial port.
--> Initializing modem.
--> Sending: ATZ
--> Sending: ATQ0
--> Re-Sending: ATZ
--> Modem not responding.
Что я могу сделать, чтобы Reliance Netconnect+ работал на моем компьютере с Linux - Fedora 14?