У меня есть компьютер с беспроводным PCI-устройством Dlink в слоте PCI. Светодиоды мигают, но при загрузке FreeBSD я не вижу устройство в dmesg.
Зачем? это проблема BIOS?
Это довольно древнее железо. Я не знаю, с чего начать копать проблему, по крайней мере.
Copyright (c) 1992-2012 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 9.0-RELEASE #0: Tue Jan 3 07:15:25 UTC 2012
root@obrian.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC i386
module_register: module pci/ral already exists!
Module pci/ral failed to register: 17
CPU: Intel(R) Celeron(R) CPU 1.70GHz (1715.31-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf13 Family = f Model = 1 Stepping = 3
Features=0x3febfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM>
real memory = 536870912 (512 MB)
avail memory = 497893376 (474 MB)
Event timer "LAPIC" quality 400
ACPI APIC Table: <ASUS P4BGL-MX>
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
acpi0: <ASUS P4BGL-MX> on motherboard
acpi0: Overriding SCI from IRQ 9 to IRQ 22
acpi0: Power Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, 1f700000 (3) failed
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0xe408-0xe40b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> mem 0xe8000000-0xefffffff,0xe7800000-0xe787ffff irq 16 at device 2.0 on pci0
agp0: <Intel 82845M (845M GMCH) SVGA controller> on vgapci0
agp0: aperture size is 128M, detected 8060k stolen memory
uhci0: <Intel 82801DB (ICH4) USB controller USB-A> port 0xd800-0xd81f irq 16 at device 29.0 on pci0
usbus0: <Intel 82801DB (ICH4) USB controller USB-A> on uhci0
uhci1: <Intel 82801DB (ICH4) USB controller USB-B> port 0xd400-0xd41f irq 19 at device 29.1 on pci0
usbus1: <Intel 82801DB (ICH4) USB controller USB-B> on uhci1
uhci2: <Intel 82801DB (ICH4) USB controller USB-C> port 0xd000-0xd01f irq 18 at device 29.2 on pci0
usbus2: <Intel 82801DB (ICH4) USB controller USB-C> on uhci2
ehci0: <Intel 82801DB/L/M (ICH4) USB 2.0 controller> mem 0xe7000000-0xe70003ff at device 29.7 on pci0
usbus3: EHCI version 1.0
usbus3: <Intel 82801DB/L/M (ICH4) USB 2.0 controller> on ehci0
pcib1: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci2: <ACPI PCI bus> on pcib1
pci2: <base peripheral> at device 9.0 (no driver attached)
pci2: <network, ATM> at device 9.1 (no driver attached)
pci2: <network> at device 10.0 (no driver attached)
rl0: <RealTek 8139 10/100BaseTX> port 0xb800-0xb8ff mem 0xe4800000-0xe48000ff at device 13.0 on pci2
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> PHY 0 on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl0: Ethernet address: 00:0c:6e:db:3e:09
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH4 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf000-0xf00f irq 18 at device 31.1 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: <AT realtime clock> port 0x70-0x73 irq 8 on acpi0
Event timer "RTC" frequency 32768 Hz quality 0
ppc0: <Parallel port> port 0x378-0x37f,0x778-0x77b irq 7 drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/16 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
pmtimer0 on isa0
orm0: <ISA Option ROM> at iomem 0xcc000-0xd0fff pnpid ORM0000 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fdc0: No FDOUT register!
p4tcc0: <CPU Frequency Thermal Control> on cpu0
Timecounters tick every 1.000 msec
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 480Mbps High Speed USB v2.0
ugen0.1: <Intel> at usbus0
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen2.1: <Intel> at usbus2
uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen3.1: <Intel> at usbus3
uhub3: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
ata1: DMA limited to UDMA33, controller found non-ATA66 cable
ada0 at ata1 bus 0 scbus1 target 1 lun 0
ada0: <SAMSUNG SV2011H RL100-08> ATA-6 device
ada0: 33.300MB/s transfers (UDMA2, PIO 8192bytes)
ada0: 19130MB (39179952 512 byte sectors: 16H 63S/T 16383C)
ada0: Previously was known as ad3
Timecounter "TSC" frequency 1715310476 Hz quality 800
Root mount waiting for: usbus3 usbus2 usbus1 usbus0
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
Root mount waiting for: usbus3
Root mount waiting for: usbus3
uhub3: 6 ports with 6 removable, self powered
Root mount waiting for: usbus3
ugen3.2: <Apple Inc.> at usbus3
Trying to mount root from ufs:/dev/ada0p2 [rw]...
drm0: <Intel i845G GMCH> on vgapci0
info: [drm] AGP at 0xe8000000 128MB
info: [drm] Initialized i915 1.6.0 20080730
вывод pciconf
holms# pciconf -lv
hostb0@pci0:0:0:0: class=0x060000 card=0x80941043 chip=0x25608086 rev=0x03 hdr=0x00
vendor = 'Intel Corporation'
device = '82845G/GL[Brookdale-G]/GE/PE DRAM Controller/Host-Hub Interface'
class = bridge
subclass = HOST-PCI
vgapci0@pci0:0:2:0: class=0x030000 card=0x25621043 chip=0x25628086 rev=0x03 hdr=0x00
vendor = 'Intel Corporation'
device = '82845G/GL[Brookdale-G]/GE Chipset Integrated Graphics Device'
class = display
subclass = VGA
uhci0@pci0:0:29:0: class=0x0c0300 card=0x80891043 chip=0x24c28086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller'
class = serial bus
subclass = USB
uhci1@pci0:0:29:1: class=0x0c0300 card=0x80891043 chip=0x24c48086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller'
class = serial bus
subclass = USB
uhci2@pci0:0:29:2: class=0x0c0300 card=0x80891043 chip=0x24c78086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller'
class = serial bus
subclass = USB
ehci0@pci0:0:29:7: class=0x0c0320 card=0x80891043 chip=0x24cd8086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801DB/DBM (ICH4/ICH4-M) USB2 EHCI Controller'
class = serial bus
subclass = USB
pcib1@pci0:0:30:0: class=0x060400 card=0x00000000 chip=0x244e8086 rev=0x82 hdr=0x01
vendor = 'Intel Corporation'
device = '82801 PCI Bridge'
class = bridge
subclass = PCI-PCI
isab0@pci0:0:31:0: class=0x060100 card=0x00000000 chip=0x24c08086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801DB/DBL (ICH4/ICH4-L) LPC Interface Bridge'
class = bridge
subclass = PCI-ISA
atapci0@pci0:0:31:1: class=0x01018a card=0x80891043 chip=0x24cb8086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801DB (ICH4) IDE Controller'
class = mass storage
subclass = ATA
none0@pci0:2:9:0: class=0x088000 card=0x161014f1 chip=0x161014f1 rev=0x01 hdr=0x00
vendor = 'Conexant Systems, Inc.'
device = 'ADSL AccessRunner PCI Arbitration Device'
class = base peripheral
none1@pci0:2:9:1: class=0x020300 card=0x161114f1 chip=0x161114f1 rev=0x01 hdr=0x00
vendor = 'Conexant Systems, Inc.'
device = 'AccessRunner PCI ADSL Interface Device'
class = network
subclass = ATM
rl0@pci0:2:13:0: class=0x020000 card=0x80b31043 chip=0x813910ec rev=0x10 hdr=0x00
vendor = 'Realtek Semiconductor Co., Ltd.'
device = 'RTL-8139/8139C/8139C+'
class = network
subclass = ethernet
Вот фото устройства ... если вам нужны идентификаторы чипсета.
