1

Я установил кластер Warewulf на Centos 7, и я установил openmpi-x86_64-1.10.0-10.el7, дополнительно я также установил mpich. Когда я запускаю mpirun с openmpi, это приводит к ошибке ниже, то же самое с mpich работает отлично. Изменение n0000 на мастер кластера также работает, но он не работает на узле.

mpirun -n 1 -host n0000 echo $HOSTNAME
[n0000.cluster:01719] [[24772,0],1] tcp_peer_send_blocking: send() to socket 9 failed: Broken pipe (32)
--------------------------------------------------------------------------
ORTE was unable to reliably start one or more daemons.
This usually is caused by:

* not finding the required libraries and/or binaries on
  one or more nodes. Please check your PATH and LD_LIBRARY_PATH
  settings, or configure OMPI with --enable-orterun-prefix-by-default

* lack of authority to execute on one or more specified nodes.
  Please verify your allocation and authorities.

* the inability to write startup files into /tmp (--tmpdir/orte_tmpdir_base).
  Please check with your sys admin to determine the correct location to use.

*  compilation of the orted with dynamic libraries when static are required
  (e.g., on Cray). Please check your configure cmd line and consider using
  one of the contrib/platform definitions for your system type.

* an inability to create a connection back to mpirun due to a
  lack of common network interfaces and/or no route found between
  them. Please check network connectivity (including firewalls
  and network routing requirements).
--------------------------------------------------------------------------

Ниже вы можете найти выходные данные кластера и IP-адреса сервера. Я также взглянул на https://www.open-mpi.org/community/lists/users/2015/09/27643.php, где описана похожая проблема, но я не думаю, что у меня есть интерфейсы в та же подсеть.

Server:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host
       valid_lft forever preferred_lft forever
2: enp0s3: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
    link/ether 08:00:27:2e:ee:c2 brd ff:ff:ff:ff:ff:ff
    inet 10.0.2.15/24 brd 10.0.2.255 scope global dynamic enp0s3
       valid_lft 85746sec preferred_lft 85746sec
    inet6 fe80::a00:27ff:fe2e:eec2/64 scope link
       valid_lft forever preferred_lft forever
3: enp0s8: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
    link/ether 08:00:27:76:b9:e7 brd ff:ff:ff:ff:ff:ff
    inet 10.1.1.1/24 brd 10.1.1.255 scope global enp0s8
       valid_lft forever preferred_lft forever
    inet6 fe80::a00:27ff:fe76:b9e7/64 scope link
       valid_lft forever preferred_ft forever


Node:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/24 scope host lo
       valid_lft forever preferred_lft forever
    inet 127.0.0.1/8 brd 127.255.255.255 scope host lo
       valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host
       valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
    link/ether 08:00:27:57:46:ce brd ff:ff:ff:ff:ff:ff
    inet 10.1.1.10/24 brd 10.1.1.255 scope global eth0
       valid_lft forever preferred_lft forever
    inet6 fe80::a00:27ff:fe57:46ce/64 scope link
       valid_lft forever preferred_lft forever

Какие-нибудь мысли?

|источник

0