У меня есть маленький вопрос. Мой друг пишет музыку с ableton live 8.1 и причиной 5. Во-первых, у него была внутренняя карта Creative Audigy 2 (с миди-геймпортом). Я заменил его карту на внутреннюю карту Creative Music на передний отсек (X-Fi), потому что я думал, что она будет лучше.
Теперь он думает, что Audigy 2 была лучшей картой.
может кто-нибудь сказать мне, если это правда в соответствии со спецификациями?
Какая креативная карта лучше для создания аудио / миди?
спецификации для XtremeMusic
Technical Specifications
■24-bit Analog-to-Digital conversion of analog inputs at 96kHz sample rate
■24-bit Digital-to-Analog conversion of digital sources at 96kHz to analog 7.1 speaker output
■24-bit Digital-to-Analog conversion of stereo digital sources at 192kHz to stereo output
■16-bit to 24-bit recording sampling rates: 8, 11.025, 16, 22.05, 24, 32, 44.1, 48 and 96kHz
■ASIO 2.0 support with direct monitoring at 16 and 24-bit at sample rates of 44.1/48/88.22 and 96kHz
■Enhanced SoundFont support at up to 24-bit resolution
Audio Performance (Rated Output @ 2Vrms, Typical Value)
■Signal-to-Noise Ratio (20kHz Low-pass filter, A-Weighted)
◦Stereo Output 109dB
◦Front and Rear Channels 109dB
◦Center, Subwoofer and Side Channels 109dB
■Total Harmonic Distortion + Noise at 1kHz (20kHz Low-pass filter) = 0.004%
■Frequency Response (+/-3dB, 24-bit/96kHz input) = <10Hz to 46kHz
■Frequency Response (Stereo only) (+/-3dB, 24-bit/192kHz input) = <10Hz to 88kHz
Connectivity
■FlexiJack (Digital In / Digital Out / Line In / Microphone) via 3.50 mm minijack
■Line level out (Front / Rear / Center / Subwoofer / Rear Center) via 3.50 mm minijacks
■AUX_IN line-level analog input via 4-pin Molex connector on card
■One External AD_Link (26 pin) connector for linking to the X-Fi I/O Console (upgrade option)
■One Internal AD_Ext connector for linking to the X-Fi I/O Drive (upgrade option)
Спецификации для Audigy 2
Audio Performance
Signal-to-Noise Ratio with AES17 filter (A-Weighted)
2V Rated Output 1V Rated Output
Stereo Output 106dB 102dB
Front and Rear Channels 106dB 102dB
Center, Subwoofer and Rear Center ~90dB ~86dB
Total Harmonic Distortion + Noise at 1kHz (A-Weighted) = 0.004% (1V, 2V Rated Output)
Frequency Response (+/-3dB, 24-bit/96kHz input ) = <10Hz to 46kHz (1V, 2V Rated Output)
High Definition Audio Quality for Playback and Recording
24-bit Digital-to-Analog conversion during playback with sampling rates of 8, 11.025, 16, 22.05, 24, 32, 44.1, 48 and 96kHz in 5.1 mode and up to 192kHz in stereo mode
24-bit Analog to Digital conversion during recording in 8, 16 or 24-bit at sampling rates of 8, 11.025, 16, 22.05, 24, 32, 44.1, 48 and 96kHz
SPDIF (Sony/Philips Digital Interface) input at up to 24-bit/ 96kHz quality
SPDIF output up to 24-bit at 48 or 96kHz
ASIO drivers for low latency (=2ms) multi-track playback and recording at 16-bit/48kHz)
Wave-Table Synthesis and Midi Features
Creative Hardware synthesizer (2x16 Channels) with 64-voice polyphony featuring E-MU®'s patented 8-point interpolation technology for accurate sample reproduction
Creative Software synthesizer - multi timbral wave-table (16 Channels)
SB1394™ Connectivity
IEEE® 1394 / FireWire® / i-Link® compatible interface with up to 400Mbps transfer rate
Sound Blaster Audigy 2 On-Board Connectors
Line level out (Front / Rear / Center / Subwoofer /Rear Center)
Digital Out for 5.1 support (6-channel SPDIF Output)
Line in
Microphone in
SB1394™/ FireWire® port
Telephone Answering Device in
Analog / Digital CD Audio in
15-pin MIDI / Joystick port extension header
Internal SB1394 header to Sound Blaster Audigy 2 Internal Drive (Upgrade Option)
AD_EXT extension header to th