Я пытался следовать вики Nix, чтобы установить Nix по специальному пути /scratch/gopinath/nix . Путь /nix не доступен для меня из-за ограничений системы, предоставляемых моим университетом. Вариант PRoot не соответствует моим требованиям. У меня тоже нет root-доступа.
Среда:
| uname -a
Linux hati.eecs.oregonstate.edu 2.6.32-431.3.1.el6.x86_64 #1 SMP Fri Dec 13 06:58:20 EST 2013 x86_64 x86_64 x86_64 GNU/Linux
| cat /etc/redhat-release
Red Hat Enterprise Linux Workstation release 6.5 (Santiago)
| gcc --version
gcc (GCC) 4.4.7 20120313 (Red Hat 4.4.7-4)
Мои усилия
Это то, что я пробовал до сих пор; Я использовал приведенный ниже скрипт install.sh в извлеченной папке /scratch/gopinath/usr/nix-boot
#!/bin/bash
set -e
export nix_boot=${NIX_BOOT-/scratch/gopinath/usr/nix-boot}
export nix_root=${NIX_ROOT-/scratch/gopinath/nix}
export RUN_EXPENSIVE_TESTS=no
export PATH=$nix_boot/bin:/scratch/gopinath/usr/bin:$PATH
export PKG_CONFIG_PATH=$nix_boot/lib/pkgconfig:$PKG_CONFIG_PATH
export LDFLAGS="-L$nix_boot/lib -L$nix_boot/lib64 $LDFLAGS"
export LD_LIBRARY_PATH="$nix_boot/lib:$nix_boot/lib64:$LD_LIBRARY_PATH"
export CPPFLAGS="-I$nix_boot/include $CPPFLAGS"
#export PERL5OPT="-I$nix_boot/lib/perl"
export PERL5OPT="-I$nix_boot/lib64/perl5"
export NIXPKGS=/scratch/gopinath/nixpkgs
all="bzip2 curl sqlite dbi dbd wwwcurl bootstrap nix"
case $1 in
-h) echo $all nix1.8; exit 0;;
-sh) $2; exit 0;;
bzip2)
(cd bzip2-1.0.6;
make -f Makefile-libbz2_so;
make install PREFIX=$nix_boot;
cp libbz2.so.1.0 libbz2.so.1.0.6 $nix_boot/lib; ) ;;
curl)
(cd curl-7.35.0/;
./configure --prefix=$nix_boot;
make;
make install; ) ;;
sqlite)
(cd sqlite-autoconf-3080300/;
./configure --prefix=$nix_boot;
make;
make install; ) ;;
libxml2)
(cd libxml2-2.9.2; ./configure --prefix=$nix_boot;
make;
cp ./libxml2-2.9.2/xmllint $nix_boot/bin
# make install;
) ;;
libxslt)
(cd libxslt-1.1.28; ./configure --prefix=$nix_boot;
make;
make install; ) ;;
gcc)
(cd gcc-4.9.2; ./contrib/download_prerequisites; )
rm -rf gcc-objs;
mkdir -p gcc-objs
(cd gcc-objs; ./../gcc-4.9.2/configure --prefix=$nix_boot;
make;
make install; ) ;;
bison)
(cd bison-3.0; ./configure --prefix=$nix_boot;
make;
make install; ) ;;
flex)
(cd flex-2.5.39; ./configure --prefix=$nix_boot;
make;
make install; );;
coreutils)
(cd coreutils-8.23; ./configure --enable-install-program=hostname --prefix=$nix_boot;
make;
make install; );;
bash)
(cd bash-4.3; ./configure --prefix=$nix_boot;
make;
make install; );;
dbi)
(cd DBI-1.631/;
perl Makefile.PL PREFIX=$nix_boot PERLMAINCC=$nix_boot/bin/gcc;
make;
make install; ) ;;
dbd)
(cd DBD-SQLite-1.40/;
perl Makefile.PL PREFIX=$nix_boot PERLMAINCC=$nix_boot/bin/gcc;
make;
make install; ) ;;
wwwcurl)
(cd WWW-Curl-4.15;
perl Makefile.PL PREFIX=$nix_boot PERLMAINCC=$nix_boot/bin/gcc;
make;
make install; ) ;;
bootstrap)
rm -rf nix
git clone https://github.com/NixOS/nix nix
(cd nix;
./bootstrap.sh ) ;;
nix)
(cd nix;
echo "./configure --prefix=$nix_boot --with-store-dir=$nix_root/store --localstatedir=$nix_root/var" > myconfig.sh;
./configure --prefix=$nix_boot --with-store-dir=$nix_root/store --localstatedir=$nix_root/var --with-coreutils-bin=/scratch/gopinath/usr/bin --enable-static --enable-static-nix ;
/usr/bin/perl -pi -e 's#--nonet# #g' doc/manual/local.mk;
echo "GLOBAL_LDFLAGS += -lpthread" >> doc/manual/local.mk;
make;
make install; ) ;;
nixconfig)
nix-channel --add http://nixos.org/channels/nixpkgs-unstable && \
nix-channel --update && \
nix-env -iA nix -f $NIXPKGS ;
;;
all) for i in $all;
do env nix_boot=$nix_boot nix_root=$nix_root ./$0 $i ;
done ;;
*) echo $all;
echo nix_root=$nix_root
echo nix_boot=$nix_boot;;
esac
Все работает нормально, пока я не попал в nix . И на nix 1.8 и на nix из репозитория я получаю
bash-4.1$ make
Makefile:28: Makefile.config: No such file or directory
GEN Makefile.config
GEN doc/manual/manual.is-valid
-:1: parser error : Document is empty
^
-:1: parser error : Start tag expected, '<' not found
^
make: *** [doc/manual/manual.is-valid] Error 1
Если я make clean а потом make
bash-4.1$ make
Makefile:28: Makefile.config: No such file or directory
GEN Makefile.config
GEN doc/manual/version.txt
GEN doc/manual/manual.xmli
doc/manual/command-ref/nix-env.xml:203: element include: XInclude error : failed build URL
doc/manual/command-ref/nix-env.xml:1368: element include: XInclude error : failed build URL
doc/manual/command-ref/nix-build.xml:129: element include: XInclude error : failed build URL
doc/manual/command-ref/nix-build.xml:184: element include: XInclude error : failed build URL
doc/manual/command-ref/nix-shell.xml:143: element include: XInclude error : failed build URL
doc/manual/command-ref/nix-shell.xml:195: element include: XInclude error : failed build URL
doc/manual/command-ref/nix-store.xml:119: element include: XInclude error : failed build URL
doc/manual/command-ref/nix-store.xml:1346: element include: XInclude error : failed build URL
doc/manual/command-ref/nix-instantiate.xml:166: element include: XInclude error : failed build URL
doc/manual/command-ref/nix-instantiate.xml:258: element include: XInclude error : failed build URL
GEN doc/manual/manual.is-valid
-:1: parser error : Document is empty
^
-:1: parser error : Start tag expected, '<' not found
^
make: *** [doc/manual/manual.is-valid] Error 1
При отладке кажется, что xsltproc вызывается с флагом --nonet как в
file: doc/manual/local.mk
$(d)/manual.is-valid: $(d)/manual.xmli
/scratch/gopinath/usr/nix-boot/bin/xsltproc --nonet \
--param section.autolabel 1 \
--param section.label.includes.component.label 1 \
--param html.stylesheet \'style.css\' \
--param xref.with.number.and.title 1 \
--param toc.section.depth 3 \
--param admon.style \'\' \
--param callout.graphics.extension \'.gif\' \
--param contrib.inline.enabled 0 \
--stringparam generate.toc "book toc" \
--param keep.relative.image.uris 0 \
--novalid \
--stringparam profile.condition manual \
http://docbook.sourceforge.net/release/xsl-ns/1.78.1/profiling/profile.xsl \
doc/manual/manual.xmli \
| /scratch/gopinath/usr/nix-boot/bin/xmllint --nonet --noout --relaxng http://docbook.org/xml/5.0/rng/docbook.rng -
Кажется , nonet флаг Мессинг со мной здесь какой - то образом, даже при использовании новейших xmllint и xsltproc (упомянутых в сценарии установки выше).
bash-4.1$ which xsltproc
/scratch/gopinath/usr/nix-boot/bin/xsltproc
bash-4.1$ /scratch/gopinath/usr/nix-boot/bin/xsltproc --version
Using libxml 20902, libxslt 10128 and libexslt 817
xsltproc was compiled against libxml 20902, libxslt 10128 and libexslt 817
libxslt 10128 was compiled against libxml 20902
libexslt 817 was compiled against libxml 20902
bash-4.1$ which xmllint
/scratch/gopinath/usr/nix-boot/bin/xmllint
bash-4.1$ /scratch/gopinath/usr/nix-boot/bin/xmllint --version
/scratch/gopinath/usr/nix-boot/bin/xmllint: using libxml version 20902
compiled with: Threads Tree Output Push Reader Patterns Writer SAXv1 FTP HTTP DTDValid HTML Legacy C14N Catalog XPath XPointer XInclude Iconv ISO8859X Unicode Regexps Automata Expr Schemas Schematron Modules Debug Zlib Lzma
Поэтому я выполнил perl -pi -e 's#--nonet# #g' #e - nonet # #g на doc/manual/local.mk как я упоминал в приведенном выше скрипте.
Теперь кажется, что поддержка C11 в GCC 4.4.7 (по умолчанию) недостаточна. Поэтому я обновил свой GCC до 4.9.2 и установил его в то же место (обновлено в приведенном выше сценарии). Теперь моя ошибка при сборке nix
$ make
...
configure: creating ./config.status
config.status: creating config.h
config.status: config.h is unchanged
GEN Makefile.config
CXX src/nix-hash/nix-hash.o
CXX src/libmain/shared.o
CXX src/libmain/stack.o
CXX src/libstore/build.o
CXX src/libstore/derivations.o
CXX src/libstore/gc.o
CXX src/libstore/globals.o
GEN src/libstore/schema.sql.hh
CXX src/libstore/local-store.o
CXX src/libstore/misc.o
CXX src/libstore/optimise-store.o
CXX src/libstore/pathlocks.o
CXX src/libstore/references.o
CXX src/libstore/remote-store.o
CXX src/libstore/store-api.o
CXX src/libutil/affinity.o
CXX src/libutil/archive.o
CXX src/libutil/hash.o
CXX src/libutil/regex.o
CXX src/libutil/serialise.o
CXX src/libutil/util.o
CXX src/libutil/xml-writer.o
CXX src/boost/format/format_implementation.o
CXX src/boost/format/free_funcs.o
CXX src/boost/format/parsing.o
LD src/boost/format/libnixformat.so
LD src/libutil/libnixutil.so
LD src/libstore/libnixstore.so
LD src/libmain/libnixmain.so
LD src/nix-hash/nix-hash
/usr/bin/ld: src/nix-hash/nix-hash: undefined reference to symbol '__pthread_key_create@@GLIBC_2.2.5'
/usr/bin/ld: note: '__pthread_key_create@@GLIBC_2.2.5' is defined in DSO /lib64/libpthread.so.0 so try adding it to the linker command line
/lib64/libpthread.so.0: could not read symbols: Invalid operation
collect2: error: ld returned 1 exit status
make: *** [src/nix-hash/nix-hash] Error 1
zsh: exit 1 ./install.sh nix
Я обошел эту ошибку, изменив doc/manual/local.mk , добавив строку GLOBAL_LDFLAGS += -lpthread . Теперь ошибка
CXX src/libexpr/parser-tab.o
In file included from src/libexpr/parser-tab.cc:255:0:
src/libexpr/parser-tab.hh:124:15: error: redefinition of ‘union YYSTYPE’
typedef union YYSTYPE
^
In file included from src/libexpr/parser.y:53:0:
src/libexpr/parser-tab.hh:124:15: error: previous definition of ‘union YYSTYPE’
typedef union YYSTYPE
^
In file included from src/libexpr/parser-tab.cc:255:0:
src/libexpr/parser-tab.hh:147:10: error: invalid type in declaration before ‘;’ token
} YYSTYPE;
^
src/libexpr/parser-tab.hh:147:10: error: conflicting declaration ‘typedef int YYSTYPE’
In file included from src/libexpr/parser.y:53:0:
src/libexpr/parser-tab.hh:147:3: note: previous declaration as ‘typedef union YYSTYPE YYSTYPE’
} YYSTYPE;
^
make: *** [src/libexpr/parser-tab.o] Error 1
И, видимо, это потому, что мой бизон был стар
| yacc -V
yacc - 1.9 20070509
| bison -V
bison (GNU Bison) 2.4.1
Я обновил это до бизона 3.0 (в сценарии выше), и ошибки исчезли, но необходимо обновить flex
GEN Makefile.config
CXX src/libexpr/parser-tab.o
In file included from src/libexpr/parser-tab.cc:255:0:
src/libexpr/parser-tab.hh:124:15: error: redefinition of ‘union YYSTYPE’
typedef union YYSTYPE
^
In file included from src/libexpr/parser.y:53:0:
src/libexpr/parser-tab.hh:124:15: error: previous definition of ‘union YYSTYPE’
typedef union YYSTYPE
^
In file included from src/libexpr/parser-tab.cc:255:0:
src/libexpr/parser-tab.hh:147:10: error: invalid type in declaration before ‘;’ token
} YYSTYPE;
^
src/libexpr/parser-tab.hh:147:10: error: conflicting declaration ‘typedef int YYSTYPE’
In file included from src/libexpr/parser.y:53:0:
src/libexpr/parser-tab.hh:147:3: note: previous declaration as ‘typedef union YYSTYPE YYSTYPE’
} YYSTYPE;
^
А обновление до flex 2.5.39 похоже, удаляет оставшиеся ошибки. Теперь о добавлении канала
bash-4.1$ nix-channel --add http://nixos.org/channels/nixpkgs-unstable
Can't load '/scratch/gopinath/usr/nix-boot/lib/perl5/site_perl/5.10.1/x86_64-linux-thread-multi/auto/Nix/Store/Store.so' for module Nix::Store: /usr/lib64/libstdc++.so.6: version `GLIBCXX_3.4.15' not found (required by /scratch/gopinath/usr/nix-boot/lib/perl5/site_perl/5.10.1/x86_64-linux-thread-multi/auto/Nix/Store/Store.so) at /usr/lib64/perl5/XSLoader.pm line 70.
at /scratch/gopinath/usr/nix-boot/lib/perl5/site_perl/5.10.1/x86_64-linux-thread-multi/Nix/Store.pm line 38
Compilation failed in require at /scratch/gopinath/usr/nix-boot/lib/perl5/site_perl/5.10.1/x86_64-linux-thread-multi/Nix/Manifest.pm line 13.
BEGIN failed--compilation aborted at /scratch/gopinath/usr/nix-boot/lib/perl5/site_perl/5.10.1/x86_64-linux-thread-multi/Nix/Manifest.pm line 13.
Compilation failed in require at /scratch/gopinath/usr/nix-boot/bin/nix-channel line 8.
BEGIN failed--compilation aborted at /scratch/gopinath/usr/nix-boot/bin/nix-channel line 8.
Это было решено установкой LD_LIBRARY_PATH для поиска в $nix_boot/lib64 После этого руководство просит меня установить nix с
bash-4.1$ cat ~/.nixpkgs/config.nix
pkgs:
{
packageOverrides = self: {
nix = self.nix.override {
storeDir = "/scratch/gopinath/nix/store";
stateDir = "/scratch/gopinath/nix/var";
};
};
}
bash-4.1$ nix-env -iA nix
error: attribute ‘nix’ in selection path ‘nix’ not found
Похоже, здесь есть решение. Так,
$ nix-env -iA nix -f ~/.nix-defexpr/channels/nixpkgs
...
building tests/test-suite.log
make[5]: Entering directory `/tmp/nix-build-coreutils-8.23.drv-0/coreutils-8.23'
building all
make all-recursive
make[6]: Entering directory `/tmp/nix-build-coreutils-8.23.drv-0/coreutils-8.23'
building all-recursive
Making all in po
make[7]: Entering directory `/tmp/nix-build-coreutils-8.23.drv-0/coreutils-8.23/po'
building check-macro-version
make[7]: Leaving directory `/tmp/nix-build-coreutils-8.23.drv-0/coreutils-8.23/po'
Making all in .
make[7]: Entering directory `/tmp/nix-build-coreutils-8.23.drv-0/coreutils-8.23'
make[7]: Nothing to be done for `all-am'.
make[7]: Leaving directory `/tmp/nix-build-coreutils-8.23.drv-0/coreutils-8.23'
Making all in gnulib-tests
make[7]: Entering directory `/tmp/nix-build-coreutils-8.23.drv-0/coreutils-8.23/gnulib-tests'
building all
make all-recursive
make[8]: Entering directory `/tmp/nix-build-coreutils-8.23.drv-0/coreutils-8.23/gnulib-tests'
building all-recursive
Making all in .
make[9]: Entering directory `/tmp/nix-build-coreutils-8.23.drv-0/coreutils-8.23/gnulib-tests'
make[9]: Nothing to be done for `all-am'.
make[9]: Leaving directory `/tmp/nix-build-coreutils-8.23.drv-0/coreutils-8.23/gnulib-tests'
make[8]: Leaving directory `/tmp/nix-build-coreutils-8.23.drv-0/coreutils-8.23/gnulib-tests'
make[7]: Leaving directory `/tmp/nix-build-coreutils-8.23.drv-0/coreutils-8.23/gnulib-tests'
make[6]: Leaving directory `/tmp/nix-build-coreutils-8.23.drv-0/coreutils-8.23'
make[5]: Leaving directory `/tmp/nix-build-coreutils-8.23.drv-0/coreutils-8.23'
...
============================================================================
Testsuite summary for GNU coreutils 8.23
============================================================================
# TOTAL: 563
# PASS: 439
# SKIP: 120
# XFAIL: 0
# FAIL: 3
# XPASS: 0
# ERROR: 1
============================================================================
See ./tests/test-suite.log
Please report to bug-coreutils@gnu.org
============================================================================
make[4]: *** [tests/test-suite.log] Error 1
make[4]: Leaving directory `/tmp/nix-build-coreutils-8.23.drv-0/coreutils-8.23'
make[3]: *** [check-TESTS] Error 2
make[3]: Leaving directory `/tmp/nix-build-coreutils-8.23.drv-0/coreutils-8.23'
make[2]: *** [check-am] Error 2
make[2]: Leaving directory `/tmp/nix-build-coreutils-8.23.drv-0/coreutils-8.23'
make[1]: *** [check-recursive] Error 1
make[1]: Leaving directory `/tmp/nix-build-coreutils-8.23.drv-0/coreutils-8.23'
make: *** [check] Error 2
builder for ‘/scratch/gopinath/nix/store/1rcj45a27mz06rlw354k1zzwvz0wf24k-coreutils-8.23.drv’ failed
with exit code 2
cannot build derivation ‘/scratch/gopinath/nix/store/m2v75p5m7irqh0z2af5idypkil9v630m-stdenv.drv’: 1
dependencies couldn't be built
cannot build derivation ‘/scratch/gopinath/nix/store/sp3ic057ydmkv4cnxrbgz016ivy3lac3-nix-1.8.drv’:
1 dependencies couldn't be built
error: build of ‘/scratch/gopinath/nix/store/sp3ic057ydmkv4cnxrbgz016ivy3lac3-nix-1.8.drv’ failed
Так что core-utils не работает. Что мне теперь делать? Тест ошибки
...
ERROR: tests/chown/separator
============================
id: cannot find name for user ID 44172
separator.sh: set-up failure:
...
И терпит неудачу
FAIL: tests/misc/help-version
=============================
0+1 records in
0+1 records out
whoami: cannot find name for user ID 44172
FAIL: whoami
FAIL: tests/id/uid
==================
id: cannot find name for user ID 44172
id: : no such user
id: 44172: no such user
id: 44172: no such user
id: +44172: no such user
id: 44172: no such user
id: 44172: no such user
id: +44172: no such user
id: 44172: no such user
id: 44172: no such user
id: +44172: no such user
...
FAIL: tests/id/zero
===================
id: cannot find name for user ID 44172
uid=44172 gid=16473 groups=16473,5087,5105,10550,12244,13985,14073,20416
id: 44172: no such user
id: 44172: no such user
....
id: cannot find name for group ID 16473
id: cannot find name for group ID 16473
....
--- exp 2015-04-12 04:20:21.655856440 +0000
+++ out2 2015-04-12 04:20:21.660856355 +0000
@@ -1,5 +1,17 @@
@@ -1,5 +1,17 @@
-id -g[z] 44172: id -gn[z] 44172: id -gr[z] 44172: id -grn[z] 44172: id -G[z] 44172: id -Gn[z] 44172
: id -Gr[z] 44172: id -Grn[z] 44172: id -u[z] 44172: id -un[z] 44172: id -ur[z] 44172: id -urn[z] 44
172: id -g[z] root: 0
+id -g[z] 44172:
+id -gn[z] 44172:
...
Поэтому я установил coreutils-8.23 с тем же префиксом и повторил попытку. К сожалению, вышеупомянутые ошибки теста в любом случае. Кажется, что он всегда пытается использовать системный id независимо от настроек пути.
Обновления
Я хотел бы отключить doChecks в файле coreutils-8.23.drv . Поэтому я клонировал репозиторий https://github.com/nixos/nixpkgs и установил переменную среды NIXPKGS указывающую на него. Затем я pkgs/tools/misc/coreutils/default.nix так, чтобы doCheck = false всегда. Далее я выполнил
nix-env -iA nix -f $NIXPKGS
...
FAIL: tests/dump-db.sh
running test tests/case-hack.sh
+ clearStore
+ echo 'clearing store...'
clearing store...
+ chmod -R +w /tmp/nix-build-nix-1.8.drv-0/nix-1.8/tests/test-tmp/store
+ rm -rf /tmp/nix-build-nix-1.8.drv-0/nix-1.8/tests/test-tmp/store
+ mkdir /tmp/nix-build-nix-1.8.drv-0/nix-1.8/tests/test-tmp/store
+ rm -rf /tmp/nix-build-nix-1.8.drv-0/nix-1.8/tests/test-tmp/db
+ mkdir /tmp/nix-build-nix-1.8.drv-0/nix-1.8/tests/test-tmp/db
+ nix-store --init
+ clearProfiles
+ profiles=/tmp/nix-build-nix-1.8.drv-0/nix-1.8/tests/test-tmp/var/nix/profiles
+ rm -rf /tmp/nix-build-nix-1.8.drv-0/nix-1.8/tests/test-tmp/var/nix/profiles
+ rm -f /tmp/nix-build-nix-1.8.drv-0/nix-1.8/tests/test-tmp/var/nix/gcroots/auto/mqgm5a11kh8r74bbz2gzygddh00lakss
+ rm -f /tmp/nix-build-nix-1.8.drv-0/nix-1.8/tests/test-tmp/var/nix/gcroots/ref
+ rm -rf /tmp/nix-build-nix-1.8.drv-0/nix-1.8/tests/test-tmp/case
+ opts='--option use-case-hack true'
+ nix-store --option use-case-hack true --restore /tmp/nix-build-nix-1.8.drv-0/nix-1.8/tests/test-tmp/case
+ nix-store --option use-case-hack true --dump /tmp/nix-build-nix-1.8.drv-0/nix-1.8/tests/test-tmp/case
+ cmp case.nar /tmp/nix-build-nix-1.8.drv-0/nix-1.8/tests/test-tmp/case.nar
++ nix-hash --option use-case-hack true --type sha256 /tmp/nix-build-nix-1.8.drv-0/nix-1.8/tests/test-tmp/case
++ nix-hash --flat --type sha256 case.nar
+ '[' ccd0c2353fbb6ff6853088e01f0557e8b9cbc9d11d2e1f8435175dc08091c2a3 = ccd0c2353fbb6ff6853088e01f0557e8b9cbc9d11d2e1f8435175dc08091c2a3 ']'
+ touch /tmp/nix-build-nix-1.8.drv-0/nix-1.8/tests/test-tmp/case/xt_CONNMARK.h~nix~case~hack~3
+ nix-store --option use-case-hack true --dump /tmp/nix-build-nix-1.8.drv-0/nix-1.8/tests/test-tmp/case
error: file name collision in between ‘/tmp/nix-build-nix-1.8.drv-0/nix-1.8/tests/test-tmp/case/xt_CONNMARK.h’ and ‘/tmp/nix-build-nix-1.8.drv-0/nix-1.8/tests/test-tmp/case/xt_CONNMARK.h~nix~case~hack~3’
PASS: tests/case-hack.sh
running test tests/check-reqs.sh
+ RESULT=/tmp/nix-build-nix-1.8.drv-0/nix-1.8/tests/test-tmp/result
+ nix-build -o /tmp/nix-build-nix-1.8.drv-0/nix-1.8/tests/test-tmp/result check-reqs.nix -A test1
download-from-binary-cache.pl: cannot figure out user name at /scratch/gopinath/nix/store/9313bj65al5bm42q6fiw7y74ayjxli1h-nix-1.8/libexec/nix/substituters/download-from-binary-cache.pl line 48.
error: substituter ‘download-from-binary-cache.pl’ died unexpectedly
FAIL: tests/check-reqs.sh
30 out of 42 tests failed
mk/tests.mk:11: recipe for target 'installcheck' failed
make: *** [installcheck] Error 1
builder for ‘/scratch/gopinath/nix/store/fl8hcbq2cqpadbdrlh2cf5zmafx79r6z-nix-1.8.drv’ failed with exit code 2
error: build of ‘/scratch/gopinath/nix/store/fl8hcbq2cqpadbdrlh2cf5zmafx79r6z-nix-1.8.drv’ failed
Поэтому я отключил doInstallCheck в pkgs/tools/package-management/nix/default.nix . Вот мои изменения до сих пор
diff --git a/pkgs/tools/misc/coreutils/default.nix b/pkgs/tools/misc/coreutils/default.nix
index 1dc5bfa..635ae2c 100644
--- a/pkgs/tools/misc/coreutils/default.nix
+++ b/pkgs/tools/misc/coreutils/default.nix
@@ -59,7 +59,8 @@ let
# (http://thread.gmane.org/gmane.comp.gnu.core-utils.bugs/19025),
# Darwin (http://thread.gmane.org/gmane.comp.gnu.core-utils.bugs/19351),
# and {Open,Free}BSD.
- doCheck = stdenv ? glibc;
+ doCheck = false;
+ # stdenv ? glibc;
# Saw random failures like ‘help2man: can't get '--help' info from
# man/sha512sum.td/sha512sum’.
diff --git a/pkgs/tools/package-management/nix/default.nix b/pkgs/tools/package-management/nix/default.nix
index 2d10511..f272bf7 100644
--- a/pkgs/tools/package-management/nix/default.nix
+++ b/pkgs/tools/package-management/nix/default.nix
@@ -43,7 +43,7 @@ stdenv.mkDerivation rec {
installFlags = "sysconfdir=$(out)/etc";
- doInstallCheck = true;
+ doInstallCheck = false;
crossAttrs = {
postUnpack =
Затем я запустил nix-env -iA nix -f $NIXPKGS ; что привело к
downloading Nix expressions from ‘http://nixos.org/releases/nixpkgs/nixpkgs-15.05pre59184.e07ea5c/nixexprs.tar.xz’...
% Total % Received % Xferd Average Speed Time Time Time Current
Dload Upload Total Spent Left Speed
0 0 0 0 0 0 0 0 --:--:-- --:--:-- --:--:-- 0
unpacking channels...
installing ‘nix-1.8’
error: opening lock file ‘/nix/var/nix/profiles/default.lock’: No such file or directory
Я передал --localstatedir=$nix_root/var" в конфигурацию. Так почему же он не использует этот каталог? Любая помощь в дальнейшей работе будет принята с благодарностью.