Я думаю, что у меня проблема с моим жестким диском.
Я попытался загрузить систему, и это заняло много времени. Через некоторое время он сказал, что диск не был загрузочным.
Я попытался запустить проверку диска, но не смог завершить.
Затем я попытался удалить его с ноутбука, чтобы посмотреть, смогу ли я восстановить файлы, но диск, похоже, не отформатирован. Когда я попытался отформатировать диск, я получил сообщение о том, что форматирование не прошло успешно.
Тест SMART вернул ошибку чтения.
Раздражает то, что когда я пытаюсь отформатировать только часть диска, он работает нормально.
РЕДАКТИРОВАТЬ : Вот вывод файла журнала:
184 Сквозная ошибка 0x0032 001 001 001 Old_age Always FAILING_NOW 1927
Что это значит?
РЕДАКТИРОВАТЬ 2: Машина, к которой у меня подключен диск, работает под управлением Windows 7 SP1, драйвер подключен через USB (sata к USB), а модель жесткого диска - MK1652GSX, а модель ноутбука - Presario CQ60.
----- полный вывод smartctl -----
smartctl 5.41 2011-06-09 r3365 [i686-w64-mingw32-win7(64)-sp1] (sf-win32-5.41-1)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF INFORMATION SECTION ===
Model Family: Toshiba 2.5" HDD MK..52GSX
Device Model: TOSHIBA MK1652GSX
Serial Number: Z8OGFLOVS
LU WWN Device Id: 5 000039 176f05fb8
Firmware Version: LV011C
User Capacity: 160.041.885.696 bytes [160 GB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: 8
ATA Standard is: Exact ATA specification draft version not indicated
Local Time is: Thu Feb 09 21:03:59 2012 GTB
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
See vendor-specific Attribute list for marginal Attributes.
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 121) The previous self-test completed having
the read element of the test failed.
Total time to complete Offline
data collection: ( 120) seconds.
Offline data collection
capabilities: (0x51) SMART execute Offline immediate.
No Auto Offline data collection support.
Suspend Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 57) minutes.
SCT capabilities: (0x0033) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 099 099 050 Pre-fail Always - 0
2 Throughput_Performance 0x0007 100 100 050 Pre-fail Always - 0
3 Spin_Up_Time 0x0003 100 100 002 Pre-fail Always - 1082
4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 5383
5 Reallocated_Sector_Ct 0x0033 037 037 010 Pre-fail Always - 1292
7 Seek_Error_Rate 0x000f 100 100 050 Pre-fail Always - 0
8 Seek_Time_Performance 0x0005 100 100 050 Pre-fail Offline - 0
9 Power_On_Hours 0x0032 091 091 000 Old_age Always - 3949
10 Spin_Retry_Count 0x0013 207 100 030 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 5085
184 End-to-End_Error 0x0032 001 001 001 Old_age Always FAILING_NOW 1927
187 Reported_Uncorrect 0x0032 001 001 000 Old_age Always - 1927
188 Command_Timeout 0x0032 100 096 000 Old_age Always - 28
189 High_Fly_Writes 0x003a 100 100 001 Old_age Always - 0
190 Airflow_Temperature_Cel 0x0022 074 031 045 Old_age Always In_the_past 26 (Min/Max 21/27)
191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 106
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 24969597
193 Load_Cycle_Count 0x0032 094 094 000 Old_age Always - 63745
194 Temperature_Celsius 0x0022 100 100 000 Old_age Always - 26 (Min/Max 13/69)
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 257
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 35
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
220 Disk_Shift 0x0002 100 100 000 Old_age Always - 148
222 Loaded_Hours 0x0032 093 093 000 Old_age Always - 3023
223 Load_Retry_Count 0x0032 100 100 000 Old_age Always - 0
224 Load_Friction 0x0022 100 100 000 Old_age Always - 0
226 Load-in_Time 0x0026 100 100 000 Old_age Always - 328
240 Head_Flying_Hours 0x0001 100 100 001 Pre-fail Offline - 0
SMART Error Log Version: 1
ATA Error Count: 2536 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 2536 occurred at disk power-on lifetime: 3948 hours (164 days + 12 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 08 00 d0 8c 41 Error: UNC 8 sectors at LBA = 0x018cd000 = 26005504
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 03 08 00 d0 8c 40 00 00:09:32.132 READ DMA EXT
25 03 80 80 ac 8a 40 00 00:09:32.130 READ DMA EXT
35 03 80 80 ac 8a 40 00 00:09:32.127 WRITE DMA EXT
25 03 80 00 ac 8a 40 00 00:09:32.125 READ DMA EXT
35 03 80 00 ac 8a 40 00 00:09:32.123 WRITE DMA EXT
Error 2535 occurred at disk power-on lifetime: 3948 hours (164 days + 12 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 06 12 08 60 40 Error: UNC 6 sectors at LBA = 0x00600812 = 6293522
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 03 08 10 08 60 40 00 00:01:21.041 READ DMA EXT
25 03 08 60 09 00 40 00 00:01:21.040 READ DMA EXT
35 03 08 60 09 00 40 00 00:01:21.040 WRITE DMA EXT
25 03 08 60 09 00 40 00 00:01:21.039 READ DMA EXT
25 03 08 08 08 60 40 00 00:01:21.038 READ DMA EXT
Error 2534 occurred at disk power-on lifetime: 3948 hours (164 days + 12 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 41 0a 05 08 60 60 Error: UNC at LBA = 0x00600805 = 6293509
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 08 08 00 08 60 40 00 00:13:34.113 READ FPDMA QUEUED
ef 02 00 00 00 00 00 00 00:13:34.113 SET FEATURES [Enable write cache]
aa aa aa aa aa aa aa ff 00:13:34.079 [RESERVED]
60 08 08 00 08 60 40 00 00:13:28.247 READ FPDMA QUEUED
ef 02 00 00 00 00 00 00 00:13:28.247 SET FEATURES [Enable write cache]
Error 2533 occurred at disk power-on lifetime: 3948 hours (164 days + 12 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 41 0a 03 08 60 60 Error: UNC at LBA = 0x00600803 = 6293507
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 08 08 00 08 60 40 00 00:13:28.247 READ FPDMA QUEUED
ef 02 00 00 00 00 00 00 00:13:28.247 SET FEATURES [Enable write cache]
aa aa aa aa aa aa aa ff 00:13:28.223 [RESERVED]
60 08 08 00 08 60 40 00 00:13:23.677 READ FPDMA QUEUED
ef 02 00 00 00 00 00 00 00:13:23.676 SET FEATURES [Enable write cache]
Error 2532 occurred at disk power-on lifetime: 3948 hours (164 days + 12 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 41 0a 03 08 60 60 Error: UNC at LBA = 0x00600803 = 6293507
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 08 08 00 08 60 40 00 00:13:23.677 READ FPDMA QUEUED
ef 02 00 00 00 00 00 00 00:13:23.676 SET FEATURES [Enable write cache]
aa aa aa aa aa aa aa ff 00:13:23.656 [RESERVED]
60 08 08 00 08 60 40 00 00:13:18.232 READ FPDMA QUEUED
ef 02 00 00 00 00 00 00 00:13:18.232 SET FEATURES [Enable write cache]
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed: read failure 90% 3949 163251
# 2 Extended offline Completed: read failure 90% 3947 6293501
# 3 Short offline Completed: read failure 90% 3946 6293501
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.