Я пытаюсь достичь следующего GOAL
Но я не могу подключиться к моему веб-приложению через дополнительный маршрутизатор так же, как с точки доступа WIFI на встроенном чипе raspi.
Растбиан 9.4
dnsmasq -v
Version de Dnsmasq 2.76 Copyright (c) 2000-2016 Simon Kelley
Options à la compilation IPv6 GNU-getopt DBus i18n IDN DHCP DHCPv6 no-Lua TFTP conntrack ipset auth DNSSEC loop-detect inotify
/etc/dnsmasq.conf
#########################################################
# DNS
#########################################################
interface=wlan0
interface=eth0
listen-address=127.0.0.1
listen-address=192.168.42.1
listen-address=192.168.1.100
bind-dynamic
#server=8.8.8.8
# Set this (and domain: see below) if you want to have a domain
# automatically added to simple names in a hosts-file.
expand-hosts
domain=local
# Add local-only domains here, queries in these domains are answered
# from /etc/hosts or DHCP only.
local=/local/
# Never forward plain names (without a dot or domain part)
#domain-needed
# Never forward addresses in the non-routed address spaces.
bogus-priv
#########################################################
# DHCP
#########################################################
# DO NOT PROVIDE DHCP ON ETHERNET, AS PI IP IS DHCP ASSIGNED BY AND RESERVED ON ADDITIONAL ROUTER (192.168.1.100)
# ADDITIONAL ROUTER IS IN CHARGE OF DHCP ASSIGNING IPs TO CLIENTS, ONLY DNS SHOULD BE PROVIDED WHEN REQUESTED ON ETH0
no-dhcp-interface=eth0
#Allow more IP than needed to allow max MAC address on WIFI board chip (32 on raspi 3B)
dhcp-range=192.168.42.2,192.168.42.50,255.255.255.0,6h
# GATEWAY
# Override the default route supplied by dnsmasq, which assumes the
# router is the same machine as the one running dnsmasq.
dhcp-option=3,192.168.42.1
#dns server address delivered to clients
dhcp-option=6,192.168.42.1
/ и т.д. / хосты
127.0.0.1 myHost
::1 localhost ip6-localhost ip6-loopback
ff02::1 ip6-allnodes
ff02::2 ip6-allrouters
127.0.1.1 myHost
192.168.42.1 myHost
192.168.42.1 myHost.local
192.168.42.1 box
192.168.42.1 box.local
192.168.42.1 box.myHost.com
192.168.42.1 myHost.com
192.168.42.1 www.myHost.com
/etc/dhcpcd.conf
# A sample configuration for dhcpcd.
# See dhcpcd.conf(5) for details.
# Allow users of this group to interact with dhcpcd via the control socket.
#controlgroup wheel
# Inform the DHCP server of our hostname for DDNS.
hostname
# Use the hardware address of the interface for the Client ID.
clientid
# or
# Use the same DUID + IAID as set in DHCPv6 for DHCPv4 ClientID as per RFC4361.
# Some non-RFC compliant DHCP servers do not reply with this set.
# In this case, comment out duid and enable clientid above.
#duid
# Persist interface configuration when dhcpcd exits.
persistent
# Rapid commit support.
# Safe to enable by default because it requires the equivalent option set
# on the server to actually work.
option rapid_commit
# A list of options to request from the DHCP server.
option domain_name_servers, domain_name, domain_search, host_name
option classless_static_routes
# Most distributions have NTP support.
option ntp_servers
# Respect the network MTU. This is applied to DHCP routes.
option interface_mtu
# A ServerID is required by RFC2131.
require dhcp_server_identifier
# Generate Stable Private IPv6 Addresses instead of hardware based ones
slaac private
# Example static IP configuration:
#interface eth0
#static ip_address=192.168.0.10/24
#static ip6_address=fd51:42f8:caae:d92e::ff/64
#static routers=192.168.0.1
#static domain_name_servers=192.168.0.1 8.8.8.8 fd51:42f8:caae:d92e::1
# It is possible to fall back to a static IP if DHCP fails:
# define static profile
#profile static_eth0
#static ip_address=192.168.1.23/24
#static routers=192.168.1.1
#static domain_name_servers=192.168.1.1
# fallback to static profile on eth0
#interface eth0
#fallback static_eth0
nohook wpa_supplicant
interface wlan0
static ip_address=192.168.42.1/24
static routers=192.168.42.1
static domain_name_servers=192.168.42.1
# protect resolv.conf
nohook resolv.conf