-2

В Дженкинс зовут к сценарию

ssh -vvv -o StrictHostKeyChecking=no someuser@10.180.129.187  "sudo /home/ram/bin/setup.sh" 

это сообщение отладки:

+ ssh -vvv -o StrictHostKeyChecking=no root@10.180.129.187 'sudo /home/ram/bin/setup.sh'
OpenSSH_5.3p1, OpenSSL 1.0.1e-fips 11 Feb 2013
debug1: Reading configuration data /etc/ssh/ssh_config
debug1: Applying options for *
debug2: ssh_connect: needpriv 0
debug1: Connecting to 10.190.128.193 [10.190.128.193] port 22.
debug1: Connection established.
debug1: identity file /home/ram/.ssh/identity type -1
debug1: identity file /home/ram/.ssh/identity-cert type -1
debug1: identity file /home/ram/.ssh/id_rsa type -1
debug1: identity file /home/ram/.ssh/id_rsa-cert type -1
debug1: identity file /home/ram/.ssh/id_dsa type -1
debug1: identity file /home/ram/.ssh/id_dsa-cert type -1
debug1: identity file /home/ram/.ssh/id_ecdsa type -1
debug1: identity file /home/ram/.ssh/id_ecdsa-cert type -1
debug1: Remote protocol version 2.0, remote software version OpenSSH_5.3
debug1: match: OpenSSH_5.3 pat OpenSSH*
debug1: Enabling compatibility mode for protocol 2.0
debug1: Local version string SSH-2.0-OpenSSH_5.3
debug2: fd 3 setting O_NONBLOCK
debug1: SSH2_MSG_KEXINIT sent
debug3: Wrote 960 bytes for a total of 981
debug1: SSH2_MSG_KEXINIT received
debug2: kex_parse_kexinit: diffie-hellman-group-exchange-sha256,diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1
debug2: kex_parse_kexinit: ssh-rsa-cert-v01@openssh.com,ssh-dss-cert-v01@openssh.com,ssh-rsa-cert-v00@openssh.com,ssh-dss-cert-v00@openssh.com,ssh-rsa,ssh-dss
debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,rijndael-cbc@lysator.liu.se
debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,rijndael-cbc@lysator.liu.se
debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,umac-64@openssh.com,hmac-sha2-256,hmac-sha2-512,hmac-ripemd160,hmac-ripemd160@openssh.com,hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,umac-64@openssh.com,hmac-sha2-256,hmac-sha2-512,hmac-ripemd160,hmac-ripemd160@openssh.com,hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: none,zlib@openssh.com,zlib
debug2: kex_parse_kexinit: none,zlib@openssh.com,zlib
debug2: kex_parse_kexinit: 
debug2: kex_parse_kexinit: 
debug2: kex_parse_kexinit: first_kex_follows 0 
debug2: kex_parse_kexinit: reserved 0 
debug2: kex_parse_kexinit: diffie-hellman-group-exchange-sha256,diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1
debug2: kex_parse_kexinit: ssh-rsa,ssh-dss
debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,rijndael-cbc@lysator.liu.se
debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,rijndael-cbc@lysator.liu.se
debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,umac-64@openssh.com,hmac-sha2-256,hmac-sha2-512,hmac-ripemd160,hmac-ripemd160@openssh.com,hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,umac-64@openssh.com,hmac-sha2-256,hmac-sha2-512,hmac-ripemd160,hmac-ripemd160@openssh.com,hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: none,zlib@openssh.com
debug2: kex_parse_kexinit: none,zlib@openssh.com
debug2: kex_parse_kexinit: 
debug2: kex_parse_kexinit: 
debug2: kex_parse_kexinit: first_kex_follows 0 
debug2: kex_parse_kexinit: reserved 0 
debug2: mac_setup: found hmac-md5
debug1: kex: server->client aes128-ctr hmac-md5 none
debug2: mac_setup: found hmac-md5
debug1: kex: client->server aes128-ctr hmac-md5 none
debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent
debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP
debug3: Wrote 24 bytes for a total of 1005
debug2: dh_gen_key: priv key bits set: 129/256
debug2: bits set: 490/1024
debug1: SSH2_MSG_KEX_DH_GEX_INIT sent
debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY
debug3: Wrote 144 bytes for a total of 1149
debug3: check_host_in_hostfile: host 10.190.128.193 filename /home/ram/.ssh/known_hosts
debug3: check_host_in_hostfile: host 10.190.128.193 filename /home/ram/.ssh/known_hosts
debug3: check_host_in_hostfile: match line 5
debug1: Host '10.190.128.193' is known and matches the RSA host key.
debug1: Found key in /home/ram/.ssh/known_hosts:5
debug2: bits set: 490/1024
debug1: ssh_rsa_verify: signature correct
debug2: kex_derive_keys
debug2: set_newkeys: mode 1
debug1: SSH2_MSG_NEWKEYS sent
debug1: expecting SSH2_MSG_NEWKEYS
debug3: Wrote 16 bytes for a total of 1165
debug2: set_newkeys: mode 0
debug1: SSH2_MSG_NEWKEYS received
debug1: SSH2_MSG_SERVICE_REQUEST sent
debug3: Wrote 48 bytes for a total of 1213
debug2: service_accept: ssh-userauth
debug1: SSH2_MSG_SERVICE_ACCEPT received
debug2: key: /home/ram/.ssh/identity ((nil))
debug2: key: /home/ram/.ssh/id_rsa ((nil))
debug2: key: /home/ram/.ssh/id_dsa ((nil))
debug2: key: /home/ram/.ssh/id_ecdsa ((nil))
debug3: Wrote 64 bytes for a total of 1277
debug1: Authentications that can continue: publickey,gssapi-keyex,gssapi-with-mic,password
debug3: start over, passed a different list publickey,gssapi-keyex,gssapi-with-mic,password
debug3: preferred gssapi-keyex,gssapi-with-mic,publickey,keyboard-interactive,password
debug3: authmethod_lookup gssapi-keyex
debug3: remaining preferred: gssapi-with-mic,publickey,keyboard-interactive,password
debug3: authmethod_is_enabled gssapi-keyex
debug1: Next authentication method: gssapi-keyex
debug1: No valid Key exchange context
debug2: we did not send a packet, disable method
debug3: authmethod_lookup gssapi-with-mic
debug3: remaining preferred: publickey,keyboard-interactive,password
debug3: authmethod_is_enabled gssapi-with-mic
debug1: Next authentication method: gssapi-with-mic
debug3: Trying to reverse map address 10.190.128.193.
debug1: Unspecified GSS failure.  Minor code may provide more information
Credentials cache file '/tmp/krb5cc_5667' not found

debug1: Unspecified GSS failure.  Minor code may provide more information
Credentials cache file '/tmp/krb5cc_5667' not found

debug1: Unspecified GSS failure.  Minor code may provide more information


debug1: Unspecified GSS failure.  Minor code may provide more information
Credentials cache file '/tmp/krb5cc_5667' not found

debug2: we did not send a packet, disable method
debug3: authmethod_lookup publickey
debug3: remaining preferred: keyboard-interactive,password
debug3: authmethod_is_enabled publickey
debug1: Next authentication method: publickey
debug1: Trying private key: /home/ram/.ssh/identity
debug3: no such identity: /home/ram/.ssh/identity
debug1: Trying private key: /home/ram/.ssh/id_rsa
debug3: no such identity: /home/ram/.ssh/id_rsa
debug1: Trying private key: /home/ram/.ssh/id_dsa
debug3: no such identity: /home/ram/.ssh/id_dsa
debug1: Trying private key: /home/ram/.ssh/id_ecdsa
debug3: no such identity: /home/ram/.ssh/id_ecdsa
debug2: we did not send a packet, disable method
debug3: authmethod_lookup password
debug3: remaining preferred: ,password
debug3: authmethod_is_enabled password
debug1: Next authentication method: password
debug1: read_passphrase: can't open /dev/tty: No such device or address
debug3: packet_send2: adding 64 (len 49 padlen 15 extra_pad 64)
debug2: we sent a password packet, wait for reply
debug3: Wrote 144 bytes for a total of 1421
debug1: Authentications that can continue: publickey,gssapi-keyex,gssapi-with-mic,password
Permission denied, please try again.
debug1: read_passphrase: can't open /dev/tty: No such device or address
debug3: packet_send2: adding 64 (len 49 padlen 15 extra_pad 64)
debug2: we sent a password packet, wait for reply
debug3: Wrote 144 bytes for a total of 1565
debug1: Authentications that can continue: publickey,gssapi-keyex,gssapi-with-mic,password
Permission denied, please try again.
debug1: read_passphrase: can't open /dev/tty: No such device or address
debug3: packet_send2: adding 64 (len 49 padlen 15 extra_pad 64)
debug2: we sent a password packet, wait for reply
debug3: Wrote 144 bytes for a total of 1709
debug1: Authentications that can continue: publickey,gssapi-keyex,gssapi-with-mic,password
debug2: we did not send a packet, disable method
debug1: No more authentication methods to try.
Permission denied (publickey,gssapi-keyex,gssapi-with-mic,password).
Build step 'Execute shell' marked build as failure
Finished: FAILURE
 Help us localize this page

1 ответ1

0

Объяснение:

Это не работает, потому что серверу требуется пароль для аутентификации, но ssh запускается Jenkins, и, следовательно, sd stdin подключен к Jenkins, а не к вашему терминалу, и поэтому ssh не может запросить пароль.Вам необходимо настроить сервер так, чтобы он принимал аутентификацию на основе ключа RSA, чтобы вы могли дать ssh ключ для аутентификации без участия пользователя.

Как использовать пару ключей RSA для аутентификации:

  1. Откройте терминал на вашем локальном компьютере
  2. Выполните команду ssh-keygen -t rsa , для местоположения просто нажмите enter, а для пароля просто нажмите enter.
  3. Выполните ssh-copy-id yourremoteuser@1.2.3.4 (замените «yourremoteuser@1.2.3.4» на ваше удаленное имя пользователя и IP-адрес сервера)
  4. Ответьте на вопрос, который хотите соединить с да.
  5. Введите пароль вашего сервера.
  6. Теперь вы можете использовать свой ключ RSA для входа на сервер.

Всё ещё ищете ответ? Посмотрите другие вопросы с метками .