Я использую LFTP для зеркалирования папки сервера SFTP с локальной папкой.
Но в настоящее время я был бы рад правильно подключиться к SFTP-серверу и перечислить содержимое ...
Я использую Windows 7, и я скачал пакет LFTP от NWGAT (http://nwgat.ninja/lftp-for-windows/).
Для меня ясно, что сначала я должен установить соединение sftp с помощью команды ssh :
ssh -v -a -x -vvv -o UserKnownHostsFile=/ssh/known_hosts -i /ssh/MyPrivateKey.ppk -p 22 user@sftp.domain.com
В конце поста вывод этой команды.
Если я использую WinSCP с файлом ppk, я могу подключиться без проблем. Но использование ssh в командной строке (с ppk не принимает парольную фразу, с pri authenticates) я получаю эту проблему (такая же проблема возникает при использовании putty с файлом ppk - сервер отказался запустить оболочку / команду).
Что-то не так с моим кодом или я что-то упустил?
Или что-то должно быть установлено также на стороне сервера (например, разрешения, что-то не совпадает)?
Вот код и вывод, спасибо за вашу помощь.
ssh -v -a -x -vvv -o UserKnownHostsFile=/ssh/known_hosts -i /ssh/MyPrivateKey.pri -p 22 user@sftp.domain.com
OpenSSH_6.6.1, OpenSSL 1.0.1i 6 Aug 2014
debug2: ssh_connect: needpriv 0
debug1: Connecting to sftp.domain.com [XXX.XXX.XXX.XXX] port 22.
debug1: Connection established.
debug3: Incorrect RSA1 identifier
debug3: Could not load "/ssh/MyPrivateKey.pri" as a RSA1 public key
debug1: identity file /ssh/MyPrivateKey.pri type -1
debug1: identity file /ssh/MyPrivateKey.pri-cert type -1
debug1: Enabling compatibility mode for protocol 2.0
debug1: Local version string SSH-2.0-OpenSSH_6.6.1
debug1: Remote protocol version 2.0, remote software version SFTP_XXXXX
debug1: no match: SFTP_XXXXX
debug2: fd 3 setting O_NONBLOCK
debug3: load_hostkeys: loading entries for host "sftp.domain.com" fr
om file "/ssh/known_hosts"
debug3: load_hostkeys: found key type RSA in file /ssh/known_hosts:1
debug3: load_hostkeys: loaded 1 keys
debug3: order_hostkeyalgs: prefer hostkeyalgs: ssh-rsa-cert-v01@openssh.com,ssh-
rsa-cert-v00@openssh.com,ssh-rsa
debug1: SSH2_MSG_KEXINIT sent
debug1: SSH2_MSG_KEXINIT received
debug2: kex_parse_kexinit: curve25519-sha256@libssh.org,ecdh-sha2-nistp256,ecdh-
sha2-nistp384,ecdh-sha2-nistp521,diffie-hellman-group-exchange-sha256,diffie-hel
lman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1
debug2: kex_parse_kexinit: ssh-rsa-cert-v01@openssh.com,ssh-rsa-cert-v00@openssh
.com,ssh-rsa,ecdsa-sha2-nistp256-cert-v01@openssh.com,ecdsa-sha2-nistp384-cert-v
01@openssh.com,ecdsa-sha2-nistp521-cert-v01@openssh.com,ssh-ed25519-cert-v01@ope
nssh.com,ssh-dss-cert-v01@openssh.com,ssh-dss-cert-v00@openssh.com,ecdsa-sha2-ni
stp256,ecdsa-sha2-nistp384,ecdsa-sha2-nistp521,ssh-ed25519,ssh-dss
debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour12
8,aes128-gcm@openssh.com,aes256-gcm@openssh.com,chacha20-poly1305@openssh.com,ae
s128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,rijndae
l-cbc@lysator.liu.se
debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour12
8,aes128-gcm@openssh.com,aes256-gcm@openssh.com,chacha20-poly1305@openssh.com,ae
s128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,rijndae
l-cbc@lysator.liu.se
debug2: kex_parse_kexinit: hmac-md5-etm@openssh.com,hmac-sha1-etm@openssh.com,um
ac-64-etm@openssh.com,umac-128-etm@openssh.com,hmac-sha2-256-etm@openssh.com,hma
c-sha2-512-etm@openssh.com,hmac-ripemd160-etm@openssh.com,hmac-sha1-96-etm@opens
sh.com,hmac-md5-96-etm@openssh.com,hmac-md5,hmac-sha1,umac-64@openssh.com,umac-1
28@openssh.com,hmac-sha2-256,hmac-sha2-512,hmac-ripemd160,hmac-ripemd160@openssh
.com,hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: hmac-md5-etm@openssh.com,hmac-sha1-etm@openssh.com,um
ac-64-etm@openssh.com,umac-128-etm@openssh.com,hmac-sha2-256-etm@openssh.com,hma
c-sha2-512-etm@openssh.com,hmac-ripemd160-etm@openssh.com,hmac-sha1-96-etm@opens
sh.com,hmac-md5-96-etm@openssh.com,hmac-md5,hmac-sha1,umac-64@openssh.com,umac-1
28@openssh.com,hmac-sha2-256,hmac-sha2-512,hmac-ripemd160,hmac-ripemd160@openssh
.com,hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: none,zlib@openssh.com,zlib
debug2: kex_parse_kexinit: none,zlib@openssh.com,zlib
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit: first_kex_follows 0
debug2: kex_parse_kexinit: reserved 0
debug2: kex_parse_kexinit: diffie-hellman-group1-sha1,diffie-hellman-group14-sha
1,diffie-hellman-group-exchange-sha1,diffie-hellman-group-exchange-sha256
debug2: kex_parse_kexinit: ssh-rsa-sha2-256@attachmate.com,ssh-rsa
debug2: kex_parse_kexinit: aes256-ctr,aes256-cbc,aes128-cbc
debug2: kex_parse_kexinit: aes256-ctr,aes256-cbc,aes128-cbc
debug2: kex_parse_kexinit: hmac-sha512,hmac-sha2-512,hmac-sha256,hmac-sha2-256,h
mac-sha1
debug2: kex_parse_kexinit: hmac-sha512,hmac-sha2-512,hmac-sha256,hmac-sha2-256,h
mac-sha1
debug2: kex_parse_kexinit: zlib,none
debug2: kex_parse_kexinit: zlib,none
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit: first_kex_follows 0
debug2: kex_parse_kexinit: reserved 0
debug2: mac_setup: setup hmac-sha1
debug1: kex: server->client aes256-ctr hmac-sha1 none
debug2: mac_setup: setup hmac-sha1
debug1: kex: client->server aes256-ctr hmac-sha1 none
debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<8192<8192) sent
debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP
debug2: bits set: 4119/8192
debug1: SSH2_MSG_KEX_DH_GEX_INIT sent
debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY
debug1: Server host key: RSA 45:49:72:ff:5c:97:0b:ba:57:98:5a:2a:49:18:21:fa
debug3: load_hostkeys: loading entries for host "sftp.domain.com" fr
om file "/ssh/known_hosts"
debug3: load_hostkeys: found key type RSA in file /ssh/known_hosts:1
debug3: load_hostkeys: loaded 1 keys
debug3: load_hostkeys: loading entries for host "XXX.XXX.XXX.XXX" from file "/ssh
/known_hosts"
debug3: load_hostkeys: found key type RSA in file /ssh/known_hosts:1
debug3: load_hostkeys: loaded 1 keys
debug1: Host 'sftp.domain.com' is known and matches the RSA host key
.
debug1: Found key in /ssh/known_hosts:1
debug2: bits set: 4092/8192
debug1: ssh_rsa_verify: signature correct
debug2: kex_derive_keys
debug2: set_newkeys: mode 1
debug1: SSH2_MSG_NEWKEYS sent
debug1: expecting SSH2_MSG_NEWKEYS
debug2: set_newkeys: mode 0
debug1: SSH2_MSG_NEWKEYS received
debug1: Roaming not allowed by server
debug1: SSH2_MSG_SERVICE_REQUEST sent
debug2: service_accept: ssh-userauth
debug1: SSH2_MSG_SERVICE_ACCEPT received
debug2: key: /ssh/MyPrivateKey.pri (0x0), explicit
debug3: input_userauth_banner
****************************************
XXXXXXXXXXXXXXXXXXXXXXXXXXXX
****************************************
This system is for the use of authorized users only
****************************************debug1: Authentications that can continu
e: publickey
debug3: start over, passed a different list publickey
debug3: preferred publickey,keyboard-interactive,password
debug3: authmethod_lookup publickey
debug3: remaining preferred: keyboard-interactive,password
debug3: authmethod_is_enabled publickey
debug1: Next authentication method: publickey
debug1: Trying private key: /ssh/MyPrivateKey.pri
debug1: key_parse_private2: missing begin marker
debug1: key_parse_private_pem: PEM_read_PrivateKey failed
debug1: read PEM private key done: type <unknown>
Enter passphrase for key '/ssh/MyPrivateKey.pri':
debug1: key_parse_private2: missing begin marker
debug1: read PEM private key done: type RSA
debug3: sign_and_send_pubkey: RSA XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
debug2: we sent a publickey packet, wait for reply
debug1: Authentication succeeded (publickey).
Authenticated to sftp.domain.com ([XXX.XXX.XXX.XXX]:22).
debug1: channel 0: new [client-session]
debug3: ssh_session2_open: channel_new: 0
debug2: channel 0: send open
debug1: Entering interactive session.
debug2: callback start
debug2: fd 3 setting TCP_NODELAY
debug3: packet_set_tos: set IP_TOS 0x10
debug2: client_session2_setup: id 0
debug2: channel 0: request pty-req confirm 1
debug2: channel 0: request shell confirm 1
debug2: callback done
debug2: channel 0: open confirm rwindow 16384 rmax 35000
debug2: channel_input_status_confirm: type 99 id 0
debug2: PTY allocation request accepted on channel 0
debug2: channel_input_status_confirm: type 100 id 0
shell request failed on channel 0