Я установил Bumblebee, он загружает драйвер nvidia правильно ... Я вижу это в /proc/drivers:
quux@quux-Ideapad-Z570 ~ $ cat /proc/driver/nvidia/version
NVRM version: NVIDIA UNIX x86 Kernel Module 319.60 Wed Sep 25 13:58:16 PDT 2013
GCC version: gcc version 4.8.1 (Ubuntu/Linaro 4.8.1-10ubuntu9)
quux@quux-Ideapad-Z570 ~ $
Но драйвер не работает, я пробовал 304, 304-обновления и 319-обновления:
Это дает гораздо более низкий FPS, чем интегрированный. Тестовый инструмент glmark2 получил оценку Nvidia с 59 баллами и встроенным Intel - 751!
Когда я запускаю optirun nvidia-settings он говорит, что You do not appear to be using the NVIDIA X driver. Please edit your X configuration file (just run nvidia-xconfig as root), and restart the X server. , Конфигурация шмеля:
[bumblebeed]
# The secondary Xorg server DISPLAY number
VirtualDisplay=:8
# Should the unused Xorg server be kept running? Set this to true if waiting
# for X to be ready is too long and don't need power management at all.
KeepUnusedXServer=false
# The name of the Bumbleblee server group name (GID name)
ServerGroup=bumblebee
# Card power state at exit. Set to false if the card shoud be ON when Bumblebee
# server exits.
TurnCardOffAtExit=false
# The default behavior of '-f' option on optirun. If set to "true", '-f' will
# be ignored.
NoEcoModeOverride=false
# The Driver used by Bumblebee server. If this value is not set (or empty),
# auto-detection is performed. The available drivers are nvidia and nouveau
# (See also the driver-specific sections below)
Driver=nvidia
# Directory with a dummy config file to pass as a -configdir to secondary X
XorgConfDir=/etc/bumblebee/xorg.conf.d
## Client options. Will take effect on the next optirun executed.
[optirun]
# Acceleration/ rendering bridge, possible values are auto, virtualgl and
# primus.
Bridge=auto
# The method used for VirtualGL to transport frames between X servers.
# Possible values are proxy, jpeg, rgb, xv and yuv.
VGLTransport=proxy
# List of paths which are searched for the primus libGL.so.1 when using
# the primus bridge
PrimusLibraryPath=/usr/lib/x86_64-linux-gnu/primus:/usr/lib/i386-linux-gnu/primus
# Should the program run under optirun even if Bumblebee server or nvidia card
# is not available?
AllowFallbackToIGC=false
[driver-nvidia]
# Module name to load, defaults to Driver if empty or unset
KernelDriver=nvidia-319-updates
PMMethod=auto
# colon-separated path to the nvidia libraries
LibraryPath=/usr/lib/nvidia-319-updates:/usr/lib32/nvidia-319-updates
# comma-separated path of the directory containing nvidia_drv.so and the
# default Xorg modules path
XorgModulePath=/usr/lib/nvidia-319-updates/xorg,/usr/lib/xorg/modules
#XorgConfFile=/etc/bumblebee/xorg.conf.nvidia
XorgConfFile=/etc/X11/xorg.conf
Как вы можете видеть в конфиге, я даже пытался использовать xorg.conf, сгенерированный nvidia-xconfig вместо Bumblebee xorg.conf.nvidia, результат тот же.
quux@quux-Ideapad-Z570 ~ $ cat /etc/X11/xorg.conf
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 304.108 (buildmeister@swio-display-x64-rhel04-07) Wed Jul
31 21:27:07 PDT 2013
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection
Section "Files"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Unknown"
HorizSync 28.0 - 33.0
VertRefresh 43.0 - 72.0
Option "DPMS"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
EndSubSection
EndSection
И конфиг шмеля:
quux@quux-Ideapad-Z570 ~ $ cat /etc/bumblebee/xorg.conf.nvidia
Section "ServerLayout"
Identifier "Layout0"
Option "AutoAddDevices" "false"
Option "AutoAddGPU" "false"
EndSection
Section "Device"
Identifier "DiscreteNvidia"
Driver "nvidia"
VendorName "NVIDIA Corporation"
# If the X server does not automatically detect your VGA device,
# you can manually set it here.
# To get the BusID prop, run `lspci | egrep 'VGA|3D'` and input the data
# as you see in the commented example.
# This Setting may be needed in some platforms with more than one
# nvidia card, which may confuse the proprietary driver (e.g.,
# trying to take ownership of the wrong device). Also needed on Ubuntu 13.04.
BusID "PCI:01:00:0"
# Setting ProbeAllGpus to false prevents the new proprietary driver
# instance spawned to try to control the integrated graphics card,
# which is already being managed outside bumblebee.
# This option doesn't hurt and it is required on platforms running
# more than one nvidia graphics card with the proprietary driver.
# (E.g. Macbook Pro pre-2010 with nVidia 9400M + 9600M GT).
# If this option is not set, the new Xorg may blacken the screen and
# render it unusable (unless you have some way to run killall Xorg).
Option "ProbeAllGpus" "false"
Option "NoLogo" "false"
Option "UseEDID" "false"
Option "UseDisplayDevice" "none"
EndSection
Также выход bumblebeed -vv
quux@quux-Ideapad-Z570 ~ $ sudo bumblebeed -vv
[47743.879935] [DEBUG]Found card: 01:00.0 (discrete)
[47743.879966] [DEBUG]Found card: 00:02.0 (integrated)
[47743.879974] [DEBUG]Reading file: /etc/bumblebee/bumblebee.conf
[47743.880372] [INFO]Configured driver: nvidia
[47743.880387] [DEBUG]Skipping auto-detection, using configured driver 'nvidia'
[47743.880525] [DEBUG]Process /sbin/modprobe started, PID 9493.
[47743.880559] [DEBUG]Hiding stderr for execution of /sbin/modprobe
[47743.969996] [DEBUG]SIGCHILD received, but wait failed with No child processes
[47743.970071] [DEBUG]bbswitch has been detected.
[47743.970080] [INFO]Switching method 'bbswitch' is available and will be used.
[47743.970087] [DEBUG]Active configuration:
[47743.970093] [DEBUG] bumblebeed config file: /etc/bumblebee/bumblebee.conf
[47743.970099] [DEBUG] X display: :8
[47743.970105] [DEBUG] LD_LIBRARY_PATH: /usr/lib/nvidia-319-updates:/usr/lib32/nvidia-319-updates
[47743.970111] [DEBUG] Socket path: /var/run/bumblebee.socket
[47743.970117] [DEBUG] pidfile: /var/run/bumblebeed.pid
[47743.970123] [DEBUG] xorg.conf file: /etc/X11/xorg.conf
[47743.970129] [DEBUG] xorg.conf.d dir: /etc/bumblebee/xorg.conf.d
[47743.970134] [DEBUG] ModulePath: /usr/lib/nvidia-319-updates/xorg,/usr/lib/xorg/modules
[47743.970140] [DEBUG] GID name: bumblebee
[47743.970146] [DEBUG] Power method: auto
[47743.970151] [DEBUG] Stop X on exit: 1
[47743.970157] [DEBUG] Driver: nvidia
[47743.970163] [DEBUG] Driver module: nvidia-319-updates
[47743.970168] [DEBUG] Card shutdown state: 1
[47743.970297] [DEBUG]Process /sbin/modprobe started, PID 9494.
[47743.970330] [DEBUG]Hiding stderr for execution of /sbin/modprobe
[47743.976076] [DEBUG]SIGCHILD received, but wait failed with No child processes
[47743.976111] [DEBUG]Configuration test passed.
[47743.976870] [INFO]bumblebeed 3.2.1 started
[47743.977080] [INFO]Switching dedicated card OFF [bbswitch]
[47744.192239] [INFO]Initialization completed - now handling client requests
Помогите мне запустить nvidia-settings