У меня есть компьютер, подключенный к Интернету через соединение Ethernet. Используя Ubuntu, я могу разрешать домены с помощью nslookup, но если я пытаюсь запустить «ping google.com» или «ping 74.125.39.104», это не сработает.
Я использовал Arch Linux, Mint и Ubuntu Live на двух нетбуках, но все они безуспешно. Windows, однако, работает просто отлично. Спаси меня от использования Windows!
Ifconfig:
sudo ifconfig eth0
eth0 Link encap:Ethernet HWaddr 00:26:18:80:79:18
inet addr:10.20.6.180 Bcast:10.20.7.255 Mask:255.255.254.0
inet6 addr: fe80::226:18ff:fe80:7918/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:5751 errors:0 dropped:0 overruns:0 frame:0
TX packets:2397 errors:0 dropped:0 overruns:0 carrier:17
collisions:0 txqueuelen:1000
RX bytes:659976 (659.9 KB) TX bytes:253881 (253.8 KB)
Interrupt:40
маршрут:
route -n
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
10.20.6.0 0.0.0.0 255.255.254.0 U 1 0 0 eth0
169.254.0.0 0.0.0.0 255.255.0.0 U 1000 0 0 eth0
0.0.0.0 10.20.6.1 0.0.0.0 UG 0 0 0 eth0
0.0.0.0 10.20.6.1 0.0.0.0 UG 202 0 0 eth0
NetStat:
netstat -nr
Kernel IP routing table
Destination Gateway Genmask Flags MSS Window irtt Iface
10.20.6.0 0.0.0.0 255.255.254.0 U 0 0 0 eth0
169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth0
0.0.0.0 10.20.6.1 0.0.0.0 UG 0 0 0 eth0
0.0.0.0 10.20.6.1 0.0.0.0 UG 0 0 0 eth0
Iptables:
sudo iptables -L
Chain INPUT (policy ACCEPT)
target prot opt source destination
Chain FORWARD (policy ACCEPT)
target prot opt source destination
Chain OUTPUT (policy ACCEPT)
target prot opt source destination
resolv.conf:
cat /etc/resolv.conf
# Generated by resolvconf
search uni-mannheim.de
nameserver 134.155.96.51
nameserver 134.155.96.53
tracepath не работает:
sudo tracepath www.google.com
1: laptop.local 0.342ms pmtu 1500
1: no reply
2: no reply
3: no reply
4: no reply
/etc/host.conf
sudo cat /etc/host.conf
# The "order" line is only used by old versions of the C library.
order hosts,bind
multi on
/etc/nsswitch.conf
sudo cat /etc/nsswitch.conf
# /etc/nsswitch.conf
#
# Example configuration of GNU Name Service Switch functionality.
# If you have the `glibc-doc-reference' and `info' packages installed, try:
# `info libc "Name Service Switch"' for information about this file.
passwd: compat
group: compat
shadow: compat
hosts: files mdns4_minimal [NOTFOUND=return] dns mdns4
networks: files
protocols: db files
services: db files
ethers: db files
rpc: db files
netgroup: nis
nslookup google.com
nslookup google.com
Server: 134.155.96.51
Address: 134.155.96.51#53
Non-authoritative answer:
Name: google.com
Address: 74.125.39.104
Name: google.com
Address: 74.125.39.105
Name: google.com
Address: 74.125.39.106
Name: google.com
Address: 74.125.39.147
Name: google.com
Address: 74.125.39.99
Name: google.com
Address: 74.125.39.103
wget google.com
wget google.com
--2011-08-17 11:05:01-- http://google.com/
Resolving google.com... 74.125.39.99, 74.125.39.103, 74.125.39.104, ...
Connecting to google.com|74.125.39.99|:80...
копать google.com
tracepath не работает, но копать работает
dig google.com
; <<>> DiG 9.7.3 <<>> google.com
;; global options: +cmd
;; Got answer:
;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 2643
;; flags: qr rd ra; QUERY: 1, ANSWER: 6, AUTHORITY: 4, ADDITIONAL: 4
;; QUESTION SECTION:
;google.com. IN A
;; ANSWER SECTION:
google.com. 175 IN A 74.125.39.103
google.com. 175 IN A 74.125.39.104
google.com. 175 IN A 74.125.39.105
google.com. 175 IN A 74.125.39.106
google.com. 175 IN A 74.125.39.147
google.com. 175 IN A 74.125.39.99
;; AUTHORITY SECTION:
google.com. 104161 IN NS ns4.google.com.
google.com. 104161 IN NS ns3.google.com.
google.com. 104161 IN NS ns1.google.com.
google.com. 104161 IN NS ns2.google.com.
;; ADDITIONAL SECTION:
ns1.google.com. 277325 IN A 216.239.32.10
ns2.google.com. 277325 IN A 216.239.34.10
ns3.google.com. 277325 IN A 216.239.36.10
ns4.google.com. 277325 IN A 216.239.38.10
;; Query time: 2 msec
;; SERVER: 134.155.96.51#53(134.155.96.51)
;; WHEN: Wed Aug 17 11:06:14 2011
;; MSG SIZE rcvd: 260